100kW Solar Farm Using 700W Solar Panels.

With 10 hours Full Sunlight, 150 x 700W Solar Panels (105kW) will Generate approx. 1'000kWh (1MWh) of Energy per Day or 365'000kWh (365MWh) Energy per Year.

Ideal for Commercial & Industrial Energy Consumption.

This sized DART module supplies enough energy for a large Commercial energy consumption.

700W Solar Panel Racking Dimensions (48m²).

"H" Beam Racking Design.

Installing the Main Mast.

Installing Slew Drive on Main Mast.

Racking being Assembled on Assembly Trestles.

Solar Panels & Sensors being Fitted on Assembly Trestles.

Testing the Racking Flange fits the Slew Drive.

Assembled Racking being fitted onto Slew Drive.

The first DART-15 Unit erected.

DART-15 with 700W Solar Panels.

Assembled DART-15 Unit.

New improved Linear Actuator Bracket.

Facing Westerly.

The Solar Farm Parked Horizontal.

The Rotation & Tilt Angles of standard DART Racking.

Fitting the Racking for 15 x 700W Panels.

10.5kW of Fixed Tilted Racking to Shade the Container.

DART-15 Spacing Brisbane Latitude.

DART-15 Spacing Sydney Latitude.

DART-15 Spacing Melbourne Latitude.

Slew Bearing 16 Bolt Flange Plate.

For those looking to Dig or Auger there own Foundation holes;

A DART-15 Double Flanged Foundation Pole requires a minimum 90cm Diameter Foundation Hole.
Tripod Braced double Flanged Foundation Pole requires 3 additional Trenches for Bracing.
A Caged re-bar Foundation requires a 90cm Diameter Foundation Hole.

NB: It is important to allow an additional 30cm Hole depth, this provides a 30cm Cement Bed below the bottom Flange Plate to take the vertical load of the DART Unit.

It is advisable to install a Earth/Ground spike at the same time, old school would be a Re-bar or Star Picket.

The Below information is required before we manufacture a DART unit to your Specification;

1. Required Panel Clearance from the ground, when Racking is at 60 degree tilt ?

2. Tell us how many kWh of Energy you want to Generate per Day ?